New York Central Alcos

New York Central Alcos
NYC RS32 #2040 leads a trio of R32s hauling Train NY-4

Saturday, October 31, 2026

New York - New Jersey Ops #5 / Part 2 *

 Greetings All,

Welcome Back to New York - New Jersey Ops #5!!!
Our fifth NY-NJ Virtual Op with my NYCTL interchanging freight traffic with Sir Neal's Atlantic Pacific Railroad continues today with more train movements getting the outbound NYNJ freight cars moving to Terminal Yard.

We open today's installment with PC engineer Robert R. reporting for duty at Bedford Park Yard.
The work at BPY starts with pulling four empty CN 50' newsprint boxcars making their virtual ops debut from All-City Storage for movement back to a Canadian paper mill.
Next stop is the Bedford Park Ford Plant as we catch three B&O auto racks loaded with finished autos being pulled from the plant for movement to a New Jersey Distribution Center.
Still working the Ford Plant two empty APRR 86' boxcars are spulled out of siding #1.
Also pulled from siding #1 is an empty EBRR 86' boxcar. The three empty 86'ers will be heading to IDEAL Auto Parts in Rock Ridge, NJ for their next NYNJ loads. 
Engineer Robert R brings PC Train BP-12 past Bedford Tower and gets the signal to proceed.
Train BP-12 heads to Terminal Yard.
After cutting off from the BP-12 freight consist engineer Robert R. couples up to the freight cars for the shove move back to Bedford Park as Train BP-41.
Train BP-41 departs Terminal Yard for Bedford Park Yard.
Now back in the cozy confines of BPY Robert R. makes his last moves spotting a pair of UP boxcars at American Hardware.
With the BPY switching complete for now Robert R. ties down his Alco RS2s and caboose in the yard.
Back in Terminal Yard PC engineer Alco Joe has been called for Train BT27/BT28, the Bedford Turn. He's arrived in the engine terminal pleased to see the engine hostler as set up a pair of Alco RS11s for today's job.
The RS11s are coupled onto the BT-27 freight consist and pumping up the air as Alco Joe takes a few minutes to exchange the latest NYNJ scuttlebutt with Kar Knocker.
Train BT-27 departs Terminal Yard.
Alco Joe arrives in Bedford on the mainline and stops the BT-27 freight cars in front of the station as a protective measure against the angry commuters who will now be delayed.
The Bedford switch work begins at the Schaefer Brewery with several loaded boxcars of beer being pulled from the siding including the HR black 40' boxcar that will be going to ShopRite in Rock Ridge, NJ.
Now working the long industrial siding we catch three 58000 series APRR RBLs loaded with baked goods from the Hostess Plant (back left) consigned to C&P Restaurant Supply in Rock Ridge, NJ being eased down the secondary track
The three APRR 58000 series RBLs have been coupled onto the freight cars going back to Terminal Yard as we see conductor Murray signaling the next block of freight cars to a gentle coupling. Don't want to break the pie crusts!!!
A short time later with the mainline now clear Alco Joe takes refuge at Bedford Tower to await clearance to use the mainline for his runaround move.
It might be a little while before Alco Joe gets that clearance as we see Empire Belt Train EB-2 is preparing to depart North Side Yard for Terminal Yard.
Train EB-2 heads to Terminal Yard.
Empire Belt Train EB-2 rolls into Terminal Yard.
After cutting from the EB-2 freight consist Senior Engineer Sir Neal spots the EBRR U23Cs at the fuel rack and is greeted by engine hostler Wet Willie. Fill 'em up Willie!!
About 30 minutes later we find Alco Joe and his RS11s coupled onto the freight cars going back to Terminal Yard as Train BT-28.
Penn Central Train BT-28 heads back to Terminal Yard.
The Bedford Turn returns to Terminal Yard.
We'll cut it here for today at the engine terminal. After cutting off from the BT-28 freight consist Alco Joe has brought his RS11s to the fuel pad. Both Sir Neal and Alco Joe notice that with four engines to service Wet Willie is now sweating profusely earning his moniker and making good use of his trusty towel. 
We'll pick it up tomorrow in Terminal Yard with the terminal swicher and the yard job setting up the next trains.
This concludes NYNJ #5 Part 2 on the NYCTL. Be sure to catch all the NYNJ action on Sir Neal's Atlantic Pacific Railroad.
Thanks for reading and watching!!!
See you tomorrow!!!

Friday, October 30, 2026

New York - New Jersey Ops #5 / Outbound / Part 1*

 Greetings All,

Welcome to New York - New Jersey Ops #5!!!
We're back for our fifth NY-NJ Virtual Op with my NYCTL interchanging freight traffic with Sir Neal's Atlantic Pacific Railroad as well as other off layout connections.

The Empire Belt trainmen get the honors today of opening NY-NJ #5 with the EBRR U23Cs back working North Side Yard after a long absence. As usual senior engineer Sir Neal will be at the throttle with conductor John handling the paperwork and directing the car movements.
The EBRR Belt Job shoves out of North Side Yard to begin its work.
Four EBRR gondolas of pipe from Gervais Pipe & Fitting are shoved to the Belt Job caboose for further movement towards Shapeless Steel in Rock Ridge, NJ.
Empty Cargill covered hoppers are pulled from the Quaker Oats Plant including the Cargill Salt car going to Allentown Yard for movement to Cargill at White Marsh, MD and its next NYNJ load.
The Belt Job is ready to head to the Hohman Ave Industrial Park to continue serving the local industries.
The Belt Job is on the move.
Work starts at Moore & Company with the U23Cs coupling onto two of the four APRR 6000 series RBLs loaded with bulk paper for Marcal in Rock Ridge, NJ.
The four APRR 6000 series RBLs and a GN boxcar from City Pallet are pulled out of the siding.
The Hohman Ave switch work is complete.
The Belt Job heads towards North Side Yard.
The U23Cs bring the train down the Belt Line across from North Side Yard where some switch work is needed to reorganize the train.
The Belt Job has been blocked and the EBRR guys await the pending arrival of the Long Island Train MA-3.
A short time later Long Island Railroad Train MA-3 from Fresh Pond Junction gets a highball at EB Tower.
Train MA-3 heads thru Bedford towards North Side Yard.
After yarding his train LIRR engineer Long Island Mike checks in with Sir Neal and conductor John.
LIRR Train MA-4 departs North Side Yard for Fresh Pond Junction.
Next stop Fresh Pond Junction
With the LIRR train now gone the EBRR guys get to work putting together Train EB-2 which will take NY-NJ traffic to the PC Terminal Yard.
Freight cars brought into North Side Yard in LIRR Train MA-3 are
shoved back.
The LIRR freight cars are coupled onto the Empire City cars.
EBRR Train EB-2 departs North Side Yard for Terminal Yard.
After yarding the EB-2 the EBRR guys collect their caboose and shoot the breeze with the PC yard crew.
Train EB-3 heads back to North Side Yard caboose lite.
A couple of hours later Kar Knocker has completed inspecting the EB-2 freight consist. Big Mike prepares to block the cars for their next moves using a pair of ex PRR SD9s. He was heard muttering What junk!
Big Mike has the yard in order with the NY-NJ freight cars preliminarily blocked for their next trains.
Big Mike clears the running track for the next outbound train to depart.
Over in the engine terminal a PC engineer confers with engine hostler Wet Willie as he picks up his assigned motive power.
PC GP38-2 #8146 couples onto the headend of hotshot TOFC Train NYNJ-1.
The terminal switcher couples PC caboose #26403 onto the hind end.
Train NYNJ-1 departs Terminal Yard for Rock Ridge Yard.
We'll cut it here for today with the NYNJ-1 getting a highball at Bedford Tower and proceeding towards Rock Ridge Yard.
We'll pick it up tomorrow at Bedford Park Yard with engineer Robert R. reporting for duty.
This concludes NY-NJ #5 Part 1 on the NYCTL. Be sure to catch all the NY-NJ action on Sir Neal's Atlantic Pacific Railroad.
Thanks for reading and watching!!!
See you tomorrow!!!

Saturday, October 24, 2026

Freight Car Spotlight / Canadian National 50' Newsprint Boxcars*

 Greetings all,
Freight Car Spotlight
Canadian National 50' Newsprint Boxcars
Welcome to another freight car spotlight. Today the spotlight will shine on the Canadian National 50' Newsprint Boxcars.
Prototype Information
In 1967 the National Steel Car Corporation started building 70 ton 50' boxcars specifically designed for shipping rolls of newsprint from paper mills in Canada to newsprint companies throughout North America. A total of 3,2592 were manufactured between 1967 and 1971 for six railways. 
"Boxcar, Canadian National - 10586862645" by Gary Lee Todd, Ph.D. is marked with CC0 1.0.
The boxcars have an inside height of 11'0" enabling newsprint rolls to be loaded in two tiers. To provide maximum protection to the easily bruised newsprint rolls the cars have smooth interior walls and a cushioned underframe. 
"CN Boxcar" by djaytoo (d*jay) is licensed under CC BY-SA 2.0.
The cars also featured an aluminum roof, NSC designed corrugated ends and either a smooth or exterior post Youngtown 9' wide plug door. The vast majority of these cars remained in service through 2001.  
"CN Boxcar" by djaytoo (d*jay) is licensed under CC BY-SA 2.0.
Model Information
I came across this four car set of Limited Edition P1K boxcars on the Trainz.com website which were listed as used with a very nice price plus I had a coupon for 10% off.
I've seen numerous types of these 50' Newsprint boxcars in various videos moving through the Northeast in pre and post Conrail era freight trains and thought they would be perfect for serving printing companies on and off the layout and as interchange traffic.
Freight cars like these could be found on NYC/PC Train VN-4 out of Selkirk which was also known as "The Paper Train" heading to Manhattan for delivery to the various newspaper printers like the NY Daily News, The Post, etc.
The boxcars come as kits with some add on details in the plastic bags. The also feature metal wheelsets and Proto knuckle couplers.
The end ladders and door lock rods have been installed. A nice feature is that these parts were cut from the sprues at the factory eliminating that chore. 1/4 ounce stick on weights were added above the trucks.
The CN 400549 is back together. The proto couplers have been matched to the Kadee Height Gauge. The factory applied ACI label is a nice touch.
All the boxcars received a shot of Testor's Dullcote. The trucks were painted with rattle can flat black and the wheel faces have been brush painted flat black.
The four car block is now ready for service.
Train VN-4 "The Paper Train" rolls thru the layout.
Final Thoughts and Comments
After initial testing I wasn't happy with how some of the cars wobbled when rolling. Truck tuning didn't help the situation and I ended up swapping some of the Proto metal wheelsets with plastic axles for Walthers metal wheelsets with metal axles. This solved that issue. I did use the Proto metal wheelsets in some other newly acquired freight cars and the rolled along just fine. Go figure.

This four car block along with other newsprint / paper service only boxcars in the fleet should make for a good looking freight train coming from papermills in the north with the needed materials to "keep the presses rolling" in the big city.
Thanks for reading and watching!!!
See you soon!!!