Empire Belt GP30s

Empire Belt GP30s
The EBRR GP30s round a curve on the Empire City Belt Line.

Saturday, September 14, 2019

P.C.C.C.M. 64 / NYCTL Part 1

Greetings All,


Welcome to our 64th Penn Central Car Movements Series!

This will be a four layout virtual op with the NYCTL interchanging freight cars with Sir Neal's APRR, PC Ralph's KPD and Brian's (ATJOE1972) RCR layouts.

The action on the NYCTL this series will be mostly concentrated in the three rail yards which actually mimics the 1:1 Penn Central. I'll be throwing in some PC tidbits as we go.

We open the action with the boys at Bedford Park Yard firing up their Alco S-2 switcher. Penn Central Tidbit #1*: When the PC opened for business it was a ''yard heavy'' railroad burdened by an overabundance of terminals.
Their first assignment is at American Hardware to pull this PRR boxcar loaded with bulk hardware that will go to Barton Mfg in Denver, CO via Brian's RCR layout. Penn Central Tidbit #2*: The Penn Central operated proportionally far more trains made up of individual carloads than any other railroad.
The BPY switch crew's next assignment is to pull two AP and one PRR 86' empty boxcars from the Ford Plant that will be heading to IDEAL Auto Parts in Rock Ridge NJ on Sir Neal's APRR.
The BPY crew claims their caboose. They will depart the Bedford Park Yard limits as Train BP-12. Penn Central Tidbit #3*: Serving Auto Plants of Detroit was hectic and expensive for the PC with the need for right away cars or shutdown cars. Often a crew would have to dig a car out of an arriving train, from a yard track or await it's repair in a shop and then speed it to an auto plant.
1/87th scale Bedford Tower operator John B gives BP-12 a wave as they pass the tower heading towards Terminal Yard.
The Alco S2 is cruising along with BP-12 heading thru Bedford.
Much to my surprise the switcher easily hauled the four boxcars and caboose up the grade to Terminal Yard.
BP-12 has arrived at Terminal Yard.
The Terminal Yard crew wastes no time in pulling the empty 86' boxcars and loaded 40' boxcar from BP-12. 
They will be added to the seven empty PCCM cars that were left in Terminal Yard at the end of PCCM 63.
Next we turn our attention to the Empire Belt RR's North Side Yard. North Side Yard at the end of PCCM 63 had eleven cars ready for departure on track #3 and four cars ready for delivery to Empire City Industries on track #1. 
Fast forward to PCCM 64 the EBRR Alco FAs have returned from a short term lease to be used as transfer train power. The EBRR trainmen are planning their car movements with 1/87th scale senior engineer Sir Neal running the Morning Industrial Job with Conductor John. 1/87th scale PC Ralph gets the Alco consist for the EB-2 transfer run to Terminal Yard. Lucky...
1/87th scale Sir Neal is at the throttle of the EBRR GP9m shoving east on the industrial track with conductor John protecting the move from his caboose platform. 
The MIJ is at Ralph's Grocery Warehouse pulling a trio of APRR 57' Reefers loaded with packaged food products for C&P Restaurant Supply in Rock Ridge NJ. The Pizza Land restaurant kit was a gift from our late friend Engineer Ed who was a huge fan of  all things trains, virtual ops, riding his motorcycle and good pizza.
With the AP reefers out of the way three similar looking EBRR 57' reefers loaded with food from C&P Restaurant Supply are spotted at Ralph's Grocery Warehouse.
Next move is to spot PC gondola #288673 at Gervais Pipe for it's next PCCM load.
The morning industrial switch work is done and the MIJ is back at North Side Yard. The guys make their plan to add the three loaded AP 57' reefers to the EB-2 transfer train going to Terminal Yard.
The three loaded AP 57' reefers are added to the rear of transfer train EB-2.
EB-2 has coupled up to its caboose and after an air test will proceed to the Penn Central's Terminal Yard.
We'll cut it here for today with 1/87th scale PC Ralph easing out the slack as he notches up the Alcos for their run to Terminal Yard.
We'll close it out tomorrow highlighting the Penn Central's Terminal Yard switch crew, adding in a few more Penn Central tidbits and the dispatch of our outbound train.   

Be sure to follow the action on 
Sir Neal's APRR
PC Ralph's KPD 
and Brian's RCR layouts!!


*Penn Central Tidbits 1&2 from the Joseph R Daughen & Peter Binzen book ''Wreck of the Penn Central" page 210.

* Penn Central Tidbit #3 from the Peter E. Lynch book 
"Penn Central Railroad Color History" page 104.

Thanks for reading!!!
See ya tomorrow!!

6 comments:

  1. To: Terminal Yard
    To: West Mill
    To: Elkhart yard

    From Rock Ridge Yard

    Acknowledgement - Inbound cars from Ford Plant to Ideal Auto Parts and Reefers from Ralph's Grocery to C&P Restaurant Supply

    Rock Ridge Yard Out!

    A great start to #64 with some history to boot! We've always stated if the Penn Central ran back then the way we run our VO sessions today, they may have lasted longer! The lineup at North Side yard with the EB and NYC locos is very impressive. Another nice tribute to our late friend Engineer Ed, thank you for mentioning our dear departed friend....

    ReplyDelete
    Replies
    1. 10-4 Rock Ridge...

      Thank you very much Sir Neal!!!

      Delete
  2. To: Terminal Yard,Rock Ridge Yard, Elkhart Yard
    From: West Mill
    Acknowledge dispatch of BP-12,the MIJ, and EB-2.
    West Mill out.

    I enjoyed the PC Tidbits! Lucky for us railfans the PC's over abundance of terminals allows us to follow the Bedford Park crew's work! Glad the Alco switcher had the power to pull that cut up to Terminal Yard. Assigning inadequate power to a train in a P.C.C.M. is something I've had experience with once! Nice to see the FA set working and I really admire all of the custom painted rolling stock features in this post!

    ReplyDelete
    Replies
    1. 10-4 West Mill...

      Thanks Ralph!!! I remember the "RSD-12 incident" as it came to be known.😊

      Delete
  3. Excellent start to the series! The little break in the PCCM post allowed me time to catch up after a very hectic move. I enjoyed them all! I like the tidbits. I'm guessing all PC's single car loads are due to them serving the NE corridor and all the manufacturing? I would think there were alot of unit trains too? Possible to have so many small customers or cars going in different directions that money is lost?

    ReplyDelete
    Replies
    1. Thanks K.K.!!! Great to hear from you! Hope all is getting settled with the big move. Glad you were able enjoy the PCCMs!

      Moving single car loads to and from locations on any system is labor intensive and expensive. Only being able to charge an ICC regulated rate the PC at times ran freight trains that actually lost money, not even making enough to cover the fuel costs.

      With the PCs freight car shortages and their annual per diem deficits in excess of $160 million the answer to your last question was yes.

      As for unit trains the PC ran quite a few that were profitable and were a bright spot for the Railroad. Coal Trains, Trail Van trains (TV prefix for TOFC and COFC) ML-12, the unit automobile train out of Detroit, Ore Trains, the joint "Rail-Bridge" train with the ATSF and last but not least and one of the most famous, The Juice Train.

      Great talking with you Mark!

      Delete