New York Central Alcos

New York Central Alcos
NYC RS32 #2040 leads a trio of R32s hauling Train NY-4

Saturday, June 3, 2017

Swap Meet Report and Follow Up Part 2

Greetings All,

Today we'll wrap up the swap meet report and follow up with the building of the Bowser PRR H-21 coal hopper kits. 

Some Pennsy H-21 info:
The H-21 is a 70 ton quad hopper that was introduced in 1911 for coal service. Approximately 30,000 of these hoppers were built between 1911 and 1917. During 1922 and 1923 the Pennsy expanded the H-21 hopper fleet to 36,000 cars . The H-21's were built with clam shell hopper doors. During the 1930's and early 1940's the clam shell doors were replaced with the saw tooth hoppers.

Round Keystone lettering was introduced in January 1930 and lasted until June 1954. The shadow keystone arrangement was used from June 1954 thru 1958. In 1958 the cars were painted black, the Pennsylvania was relocated and 7" PRR initials were added.

But wait! There's more! In 1971 the Penn Central Sam Rea shops reclassed 602 Pennsy H-21 hoppers 135524-139811 to PC class H5, 432350-432951 from December 1970 thru March 1971 after extensive repairs and modifications. They did not however qualify for AAR rebuilt status.

About 543 of the newly classed H5s made it to Conrail! That's sixty years of revenue service! 

Lets get to the model building;

Last installment we left the newly washed parts drying and ready for assembly.
The kits are back in their respective boxes to keep them organized during the build process.
Plastruct Bondene and Super Glue will be our adhesives for this project.
An upside down view shows the painted weights blending in nicely, the under frame is in place as are the hopper doors. Note: Install the 3 piece reservoir cylinder and triple valve set first. Put the weights in place and install the under frame. Then install the hopper doors. Looking at the coupler boxes we see two black sleeves to keep the Kadee couplers in place while using the kit supplied 0-80 screws.
The bar braces and main braces with gussets are glued in place with Plastruct Bondene. There is a shallow channel inside the car that will hold the braces in place. Apply some light squeezing pressure to keep the braces snug against the inner walls and then touch the braces with the Plastruct Bondene using the bottle brush. A little goes a long way here so don't get glue happy!
The Wine door locks are glued in place with super glue. Dab a little super glue at the receiving holes for the door locks and pres them into place. Again a little goes a long way here. 
A finished H-21 car being tested against the Kadee height gauge. All four H-21 kits lined up very nicely with the gauge which was nice.
PRR 177160 has been sprayed with Testors Dullcote. The coal load has been spray painted with flat black and the trucks have been spray painted with brown primer. The wheel faces were brush painted with acrylic burnt umber. 
 The four car set poses in Terminal Yard.
The 177160 is featured on the hopper car boxes and here is the prototype and model. 
All told the kits were a pretty straight forward build taking about 20- 30 minutes each. The finished cars were free rolling and will be equipped with metal wheels in the near future. The finished cars look very nice and while they are a little dated for the PC in their brown paint don't be surprised if you see them in a PC unit train! 

That's it for the Swap Meet Report!

Gotta run! P.C.C.M. 35C is heading my way. PC Train WV-2 has left West Mill on Ralph's Kings Port Division layout and was headed for Selkirk.

PC Train VN-4 (Selkirk to Terminal Yard) is due in shortly!
Thanks for reading!!

Thursday, June 1, 2017

Swap Meet Report and Follow Up

Greetings All,

Saturday May 27th 1:1 Scale Engineer Ed and I attended a swap meet hosted by our local hobby shop, Trainmaster Models of Buford GA. Readers may remember my goal of obtaining some cheapie coal hoppers to repaint and letter for the Penn Central as part of a joint project with 1:1 PC Ralph and Engineer Ed. Things didn't turn out exactly as planned but I did come home with ten coal hoppers! But none for the joint project. Let me explain;

I purchased these eleven kits from a swap meet vendor for $40.00. Those counting at home will hopefully come to the same $3.64 cost per kit as I did. 
The six Stewart kits included 3 built P&LE hoppers with Kadee couplers and 3 NYC hoppers still new in the box. Price: $20.00
The four Bower hopper kits are all new in the box.
 And this N5C New York Region caboose that is already built.
These five were $20.00

With all the hopper cars painted nicely in road names that could be considered home road in my basement and with different road numbers for each car there is no way I will repaint them.

So let's take a look at some of the building process for these kits;

I tackled the Stewart kits first as they looked easier to build. Here they are at Terminal Yard.
The three P&LE cars at Terminal Yard. Prior to building and putting them into service I washed all six and painted their metal weights, frame and trucks flat black.
A Bowser PRR H21A kit ready to go
Prior to building I washed all the cars in soapy water like I did with the Stewart cars.
And set them out to dry here. Note the Bowser kits also come with plastic coal loads.
The cars get some sunlight from the Patti-O. Now would be a good time to paint the waits outside.  
Where's the weights?!
AHA! they were under a cardboard insert
The holes were a little rough so I filed them down prior to spray painting.
Six brown and two black should do he trick
All components drying nicely. Next installment I'll focus on the building of the cars.
Stay tuned for Part 2!
Thanks for reading!
And don't forget the Virtual Ops are under way!
Check PC Ralph's Blog entries!

Friday, May 26, 2017

Pool Power Opens The Summer Action

Greetings All,

With the New York Central Train Layout back up and ready for action I had a sort of modeler's block on what engines and cars I wanted to take out of their boxes and put on the layout. While I contemplated this I was also thinking about the Memorial Day Weekend and the recent opening of our neighborhood pool. Pool? Hmm...Pool Power? Hmmm... And there was the inspiration for getting the first actual revenue train into Empire City. 

What is Pool Power among railroads? It simply allows for two or more railroads to run an entire train with diesel locomotives thru congested terminals with minimum delays. The railroads kept accounts of locomotive mileage on foreign roads and any imbalances were reconciled by agreement, with either a fixed cost per mile charge or a loaned diesel to run off the owed mileage. The whole process became known as motive power pooling and the New York Central was an early participant in motive power pools and run through trains.

For today's action I concentrated on using two loaner diesels from the CB&Q. The choice of which road name was cemented by recent conversations with a fellow modeler known here as ATJOE1972. The NYC and CB&Q used end terminal and routing thru Elkhart - Omaha Nebraska, via Chicago for their motive power pooling agreements. 

From the New York Central Railroad Color History by Brian Solomon with Mike Schafer. Page 54 covers the NYC's involvement.
 A close up of the connecting railroads and terminals
With the story set let's take a look at the action;

CB&Q F3As running off owed miles leave Terminal Yard with train EC-3 destined for North Side Yard.
Rolling thru Bedford we can see University Milling in need of rail cars to get back into operation. The P&E boxcar spotted at Berk Enterprises is being loaded for use in the next P.C.C.M.
 If we're going to run CB&Q engines we might as well get the CB&Q rolling stock into the mix. This is a Proto 2000 kit. The small lettering near the door says "Do not load with Lime, Soda Ash, Bulk Cement, Hides, Oil Tar and Creosote Products or any commodity that will render it unfit for Flour Grain Loading" This car has the 'Everywhere West' slogan on one side and the 'Way of the Zephyrs' on the other side.
Burlington Refrigerator Express cars with both wood and steel sides. Models are Athearn BB.
1/87th scale John B is back on duty at Bedford Tower and gives the high ball to EC-3. 1:1 John B was a proponent of using 'Pool Power' to get my pair of Mopac B23-7s on the N.Y.C.T.L. Looking at photo #2 above he was right as the Mopac and NYC had pool power agreements in place. 
EC-3 on the High Line. The boxcar with the yellow door is a Missouri, Kansas and Quincy 50'er that older modelers will recognize as belonging to NMRA Master Modeler Gary Hoover. It is an Accurail product.
EC-3 heads thru midtown. The lady on the left  better get her nose out of her pocketbook and look up! 
 A CB&Q wood sides boxcar and double door boxcar.
CB&Q F3As, 1/87th scale Larry D and a chain gang clearing the mess at Hohman Ave. let us know that EC-3 is arriving at North Side Yard. 
 EC-3 arrives at Terminal Yard. 
Extended vision CB&Q Athearn RTR caboose #13635  brings up the markers. I believe the CB&Q actually had this style of caboose.
Behind the caboose we can see the investigation is under way on this possible mob hit.
The 1/87th scale trainmen of the N.Y.C.T.L. gather at North Side Yard to check out the foreign power. Keep an eye on 1/87th scale PC Ralph. He looks like he's ready to head out and where's his car?
What's this?! Seems 1/87th scale PC Ralph took advantage of the N.Y.C.T.L. hiatus and has purchased two promotional vehicles for his Ralph's Grocery empire.
Here's a close up of 1/87th scale PC Ralph burning up the asphalt with this over sized custom make hot rod shopping cart. And it's a business write off. Way to go Ralph!
Meanwhile the foreign power runs caboose lite back to Terminal Yard
Now it's time to get the Empire City businesses back in business. Four 40' reefers are spotted at Ralph's Grocery warehouse under the watchful eye of 1/87th scale Hot Rod Shopping Cart Ralph.
The North Side Yard power today are the old reliable and turbocharged NYC EMD GP20s. 
I really like the way these GP20s look in mainline service and even more so in local service. Their short wheel base makes them very nimble, their weight gives them excellent pulling power and they run extremely well at slow speeds. Both GP20s are Life Like Proto 2000 models. 


That's it for today. Keep an eye out for the next P.C.C.M. installment. 1:1 scale PC Ralph's Kings Port Division will be originating the action. http://kingsportdivision.blogspot.com/ and I'm looking forward to getting back into the swing of things with the virtual ops.

I'll also be meeting this Saturday with 1:1 Engineer Ed at our L.H.S., Trainmaster Models in Buford GA for a swap meet. I'm hoping to score some rib sided cover hoppers for a joint project with 1:1 PC Ralph and Engineer Ed. More on that in future posts.

Thanks for reading!

Monday, May 22, 2017

N.Y.C.T.L. Back in Operation!

Greetings All,

Good news to report today. The N.Y.C.T.L. is back in operation! After a two week hiatus the layout is back together and trains are running on a limited basis. But they are running!

The new main water pipe into the house can be seen in the upper left. The white access panel hides the water pressure reducing valve and the valves for turning off the main and front hose bib. Much neater than having them hanging from the ceiling.
Terminal Yard is now empty of all the boxes, structures and 'stuff' that was being temporarily stored here. Oops, I just remembered I still need to vacuum this portion of the yard.
After the plumbing project I vacuumed the stripped down layout and then vacuumed the individual buildings before placing them back on the layout.
Neat and clean, but eerily bare of 1/87th scale life.
My next assignment is to replace the 1/87th scale figures, vehicles and most importantly the trains. I'll need to consult with the Dispatch Sheet to help remember what is supposed to be where for the Penn Central Car Movements aka the virtual ops.
The greening of the mountain can now resume. Need to get my artist here asap!
Vehicles and more vehicles! 1/87th scale people, cars, trucks and construction equipment fill these boxes. 
At the end of the day with the Mets game in the books the first train ran on the layout.
Well how do you like that?! The layout is not even in operation for ten minutes and already we see someone has been whacked. Not sure what happened here yet but the investigation has just begun.
The ceremonial Empire City viaduct publicity photo.
And to those modelers with duplicate numbers on some of their rolling stock I offer this as proof that it is prototypical.

Thanks for reading!!!