New York Central Alcos

New York Central Alcos
NYC RS32 #2040 leads a trio of R32s hauling Train NY-4

Tuesday, August 6, 2013

40' Boxcar Six Pack

Greetings Blog Followers,

A six pack of custom painted 40' Boxcars has been completed and put into service today. The project consists of six AHM 40' Penn Central boxcars that were purchased years ago. The cars were upgraded with additional weight, body mounted couplers and metal wheel sets. They run well but since starting my fleet painting projects the cars just don't look that good to me anymore. After mulling it around and painting 1 of the cars I decided to just repaint the cars.

The cars are painted with Jade Green rattle can paint and lettered with Microscale Decals. The project took about a week as it took time and copious amounts of Walther's Solvaset for the larger decals to settle in. The cars received a coat of Testor's Dullcote to protect the decals and eliminate the gloss look of the paint.   


The newly painted cars pose on the layout








The newly painted cars make their way to Terminal Yard and their first assignment
 

Saturday, August 3, 2013

NYC / PC Power Issues

Greetings Blog Followers,

Two recent engine failures have spurred this advisory post. The units involved are both from the Bachmann DCC on Board line, one a New York Central RF16A (Shark Nose) and the other a Penn Central GP38-2.

The Problem: Plastic Coupling on metal shaft that connects the drive shaft to the rear power truck. Seems plastic coupling works it's way free from the smooth metal shaft causing the rear truck to lose power.

Solution:  Place a small dab of gel CA the hole of the coupling and then insert coupling onto metal shaft. Allow to dry and cure overnight.  Reassemble and test.

Misc Notes: In addition to both units being from the Bachmann DCC on Board releases the failures occurred while both units were in multiple unit operation. The RF16A being run in an A-B-A consist of Bachmann DCC on Board Shark units and the GP38-2 being run with a Bachmann DCC on Board GP40.

PC # 8148 being run in consist prior to being sidelined with a disconnected rear coupling  


 NYC RF16A A-B-A consist. The rear unit, RF16A #4173 also suffered coupling failure on the rear truck.
 

   

Thursday, August 1, 2013

Newly Painted Cars Coming For The NYC & PC

Greetings Blog Followers,

After mulling this over for a few weeks I have decided to repaint six AHM Penn Central 40' boxcars. The cars had previously been upgraded with body mounted Kadee couplers, metal wheels and additional weight. They run and perform well but since I began my repaint program they quite frankly no longer look so good to me. That said it was either relegate them to a life of infrequent use and much shelf time or repaint them and have them for everyday revenue service.

Here is a sample of the cars to be repainted. 


 Here are pictures of the first car repainted and lettered
 


Weather and time permitting the remaining five will be ready for service very shortly. The cars have been painted and are ready for decals.

Monday, July 29, 2013

Lehigh Valley 50' Boxcars Finally Layout Ready

Greetings Blog Followers,

Ever have one of those projects on your modeling to do list that never quite gets completed? Here is the story of one such rolling stock project. In the 1990s I visited a huge model railroad display in Flemington New Jersey called Northlandz ( http://www.northlandz.com/index.html ). One of the things I liked was a train consisting of a Lehigh Valley locomotive a several white and black Lehigh Valley 50' boxcars. Probably the first "unit train" I ever saw. I already had two Lehigh Valley locomotives, A Proto 2000 SW8 and a Walther's Trainline FA so I kept my eyes open for a few similar Lehigh Valley boxcars. As luck would have it International Hobby Corp in Philadelphia was having a freight car sale and I bought six of their Lehigh Valley 50' white and black boxcars.


Upon arrival on the old layout the cars ran terribly. At this time much of the HO Scale rolling stock came with horn hook talgo mounted couplers and plastic wheels. After wobbling around the layout for awhile the cars were relegated to a siding and then a shelf seldom seeing any action. Upon moving and starting a new layout the cars remained in the bottom of the box. As I started upgrading my fleet the cars eventually received body mounted knuckle couplers and additional weight however they still rolled terribly and saw infrequent track time.

Around 2011 I started to upgrade my locomotive fleet with number boards and the freight car fleet by eliminating duplicate numbers. The LV cars received six new road numbers ran a bit and then back into the box. All the while new cars have been added to the fleet and upgraded with metal Kadee couplers and metal wheels. In late 2012 three of six LV 50' boxcars received Intermountain metal wheels. The difference was amazing. The car rolled straight and true! They could now become layout regulars. The next fleet upgrade in 2013 saw the remaining 3 cars receive Intermountain metal set and voila! the six LV cars were running great.

Now finally after almost 15 years the six Lehigh Valley Boxcars are in the regular revenue freight rotation. Why the long delay in getting these cars upgraded? Looking back it seems like they suffered from an out of sight out of mind situation. When new metal wheels arrived and I picked the cars to upgrade they were always overlooked. As new cars were purchased and fleet upgrades continued these cars just could not crack the starting rotation. Now I'm glad to finally utilize them.  

Here are the last three cars toward the rear of a fleet upgrade train heading to Terminal Yard 

A close up of NIRX #41002 and NIRX #41005 The reporting marks belong to General Electric who owned and leased the cars to the Lehigh Valley. The prototype had a total of four of these NIRX cars.

The Six LV cars behind a Proto 2000 SW8 

The Lehigh Valley cars on the upper level

The six cars together at last on the upper level viaduct
   

Friday, July 19, 2013

New E Units For The Layout

Greetings Blog Followers,

The New York Central Train Layout is pleased to announce that two new E units have arrived and been put into service on the layout. Both units are from the Life Like (pre Walther's) Proto 2000 line and are an E7A and E8A. The units were acquired used but are in excellent shape. The units were stripped of their original Southern paint and repainted black and lettered for the Penn Central using Microscale Decals.

Penn Central on the New York Central ? Yes, the fact is I grew up in New York and 1969 was a great year for me and the city as a whole. The Jets won Super Bowl III, the Mets won the World series, The Knicks won the NBA Championship in the 1969-70 Season. Muscle cars abounded. The railroad that was there for it all was the Penn Central. The PC was the talk of the town, although the talk wasn't necessarily good. I remember more about the PC then the NYC and that is why I include it on the layout. Additionally the Penn Central is the perfect bridge to use my NYC equipment and Conrail equipment. The PC was in the middle of it all.

 Southern Railroad E8A and E7A run lite to Terminal Yard for forwarding to paint shop


The E7A brings up the rear

The units are now known as PC E8A #4317 and PC E7A #4210

The Es pull a passenger train towards Empire City Station. The E8A has received new Farr Air Grills from Plano.

The Es have been separated and are in revenue service. The E7A leads a PC (ex PRR) B60 baggage car and a consist of NYC and PC passenger cars into Empire City Station. The E8A has a NYC Flexi-Van flat and a consist of NYC, PRR and NH passenger cars out of the station 

PC E8A 4317 with a Flexi-Van plus in tow

The new Es coming, going and earning their keep

 Close up of the E8A. The unit has had it's paint touched up as it had a very weathered look after it received a shot of Testor's dullcote. This is possibly due to the outside humidity when the dullcote was applied.   

Close up of the E7A


  

Tuesday, July 16, 2013

Train Transfers

Greetings Blog Followers,

This past weekend I caught some freight transfers running into and out of Terminal Yard.

A Penn Central  Alco RS2 unit leads a three car consist of heavyweight passenger cars recently acquired from the A.T.S.F. The cars will be forwarded to the Repair Shop and Paint Shop for refurbishment.  




A B&O GP30 leads a two car transfer freight to Terminal Yard

                                      


The B&O GP30 plus caboose returns light to B&O rails



Alco RS units lead a small transfer run from Terminal Yard to the Empire City REA Building. Note the cars in the consist that were received earlier at Terminal Yard.




A pair of RS Units lead a freight back from the REA building to Terminal Yard with cars to be sorted and blocked into outgoing road trains.


Monday, July 15, 2013

Fleet Upgrades on the Move

Greeting Blog Followers,

Two New York Central  SW8 switchers haul the latest fleet upgrades to Terminal Yard.


Enjoy